Lab Disinfection and Sterilization
There are three common methods used for sterilizing laboratory materials: wet heat, dry heat, and ethylene oxide gas. Wet heat uses damp steam which sterilizes contaminated materials once pressure reaches 15 psi at 250˚ F (121˚C) for a minimum of 30 minutes. Wet heat comes with a number of potential problems which include poor heat conductors taking longer to sterilize, deep trays interfering with air removal, double bagged items or tightly stacked loads preventing steam from circulating, just to name a few. Dry heat is less effective than wet heat taking up to 2-4 hours and needing higher temperatures (320˚-338˚F or 160˚-170˚C) to sterilize. Ethylene oxide gas is lethal to all microorganisms but is also known as a carcinogen and can be explosive so extreme care must be used when working with it. Ethylene oxide gas sterilizers and aerators must be properly vented in order to be effective and heat resistant organisms and heat sensitive equipment will see the best effects from the gas. As with wet heat, there are many factors that determine how effective the treatment will be: temperature, concentration of the ethylene oxide, humidity and exposure time. With so many factors to try to get perfect in order to sterilize your laboratory, wouldn’t it be great to have one method that is full proof, no matter the temperature or conditions?
TOMITM’s patented Binary Ionization Technology® (BITTM) does just that and is an EPA registered combination solution and application technology, branded as SteraMistTM, a direct offspring of the Defense Advanced Research Projects Agency (DARPA). BIT is a process that aerosolizes and activates a low concentration of hydrogen peroxide solution that produces a fine aqueous mist which contains a high concentration of Reactive Oxidative Species (ROS). Pathogenic organisms are damaged by ROS through oxidation of unsaturated fatty acids and amino acids which lead to cellular disruption or dysfunction.
The SteraMistTM Surface Unit enables mold remediation to all surfaces, including sensitive laboratory equipment. The SteraMistTM Surface Unit is the world’s only fully portable hand-held mold remediation system and achieves consistent control during remediation and has a six log (99.9999%) kill of pathogens, viruses, and spores. The Activated Ionized Hydrogen Peroxide (AIHP) that’s emitted through the SteraMistTM Surface does not require any wipe down or rinsing and leaves no residue behind and with only 8 minutes needed from application through contact time, and no additional time needed for aeration, laboratory staff can quickly regain access to their space to continue their work.
The SteraMistTM Environmental Unit can provide complete air and surface mold remediation to sealed spaces of up to 3,663 cubic feet and each applicator can treat up to a 1,221 cubic foot space. Because the SteraMistTM Environment is remotely controlled, it allows for safe, consistent air and surface mold remediation and can also be configured to treat multiple spaces simultaneously, to help with accidental contaminations in the labs or overnight cleanings. Just like the SteraMistTM Surface, the SteraMistTM Environment can achieve a six log (99.9999%) kill of viruses, pathogens, and spores and also has a quick turnaround time of just over 35 minutes from application through aeration time.
ProEx Services is the Factory Sales Representative for TOMI™ Environmental Solutions, Inc., a global bacteria decontamination and infectious disease control company. Contact ProEX today for a quote or more information on validation and EPA certification of the Tomi AiHP sterilization effectiveness.